APP Bluetooth Music LED Bulb Speaker

1, Mini Bluetooth LED Bulb Speaker

Product Size: D95mm*H125mm
Type: Bluetooth bulb speaker Color option: Pink,Blue,Green,White.
Speaker Power :3W
LED Power: 6W
Dimmable: Yes.    Base: E27
Amplifier: Class D
Color light: Cool white or Warm white
Signal input: Bluetooth 3.0
Remote distance: in 10 meters
Working temperature: -20℃ ~40℃
Working voltage: AC 100-240V
Body materials: ABS
With one piece wireless controller

2, Music Bluetooth LED Bulb Speaker

Product Size: D87mm*H140mm

Type: Bluetooth bulb speaker Color option: Pink,Blue,Green,White.

Speaker Power : 10W

LED Power: 7.5W(Taiwan chip)

Dimmable: Yes.    Base: E27

Amplifier: Class D

Color light: Cool white or Warm white

Signal input: Bluetooth 3.0

Remote distance: in 10 meters

Working temperature: -20℃ ~40℃

Working voltage: AC 100-240V

Body materials: ABS

With one piece wireless controller

Advantages:

•Enjoy music anytime any where.

•Adjust the brightness and volume with remote controler ,wireless and easy.

•Color choice, excellent workmanship.Special wireless bluetooth speaker and LED Lamp.

•Both light brightness and music volume are adjustable.

•High brightness and low power consumption.

•Energy saving and environmental protection

Application

1.Used as lamp, either mounted on the ceiling, but also as wall lamp.

2.Used as loundspeaker,whether in the living room dining room, kitchen or room; whether in the bathroom or the office, anywhere, anytime 

Ground, connected to 85-265V household power, links to your Bluetooth phone, you can enjoy the wonderful music.

3.Room, den, living room, kitchen, dining room, bathroom, balcony, gym,hotels etc.

3, RGB Bluetooth LED Bulb Speaker

Product Size: D85mm*H147mm
Type: Bluetooth RGB bulb speaker
Speaker Power : 10W
LED Power: 7.5W(Taiwan chip)
Dimmable: Yes.    Base: E27
Amplifier: Class D
Color light: Cool white+Mixed RGB
Signal input: Bluetooth 3.0
Remote distance:  in 10 meters
Working temperature: -20℃ ~40℃
Working voltage: AC 100-240V
Body materials: ABS

With one piece wireless controller

3, APP Bluetooth LED Bulb Speaker
Product Size: D80mm*H135mm
Type: Bluetooth APP RGB bulb speaker
Speaker Power: 10W
LED Power:10W(Taiwan chip) 
Dimmable: Yes.    Base: E27
Amplifier: Class D
Color light: Cool white+unlimited color
Signal input: Bluetooth 4.0
Remote distance: in 15 meters
Working temperature: -20℃ ~40℃
Working voltage: AC100~240V
Body materials: ABS

Compatible with iOS and Android System (iOS5 and above; Android4.0 and above)

Packing method:
1pc/inner box; 50inner boxes/carton.
Product weight: 0.165kg
Inner box size: 11.5x9.5x17.5cm
Inner box gross weight: 0.25KG
Carton size: 50x37x60cm 
Carton gross weight: 16.0KG          
Carton-charged weight: 23KG
12000 units / 20 GP

30000 units / 40 HP

4,Bluetooth APP LED Bulb Speaker

Product Size: D80mm*H145mm

Type: Bluetooth APP RGB bulb speaker

Speaker Power: 10W

LED Power:10W(Taiwan chip)

Dimmable: Yes.    Base: E27

Amplifier: Class D

Color light: Cool white+unlimited color

With 1pc wireless controller

Signal input: Bluetooth 4.0

Remote distance: in 15 meters

Working temperature: -20℃ ~40℃

Working voltage: AC100~240V

Body materials: ABS

Compatible with iOS and Android System (iOS5 and above; Android4.0 and above)

Packing method:

1pc/inner box; 60inner boxes/carton.

Product weight: 0.16kg

Inner box size: 9.5x9.5x15.5cm

Inner box gross weight: 0.25KG

Carton size: 49x49.5x39cm 

Carton gross weight: 15.4KG

Carton-charged weight: 20KG

Download APP

Contact us

NEW DESIGN

How to use APP Bluetooth Music LED Bulb Speaker

Next: CCT adjustable LED Lights can protect our health!

bluetooth rgb+cct adjustable led bulb, music bluetooth led bulb, rgb+dua...

bluetooth rgb+cct adjustable led bulb

Contact us: info@newstarleds.com

Control via Bluetooth (any device with bluetooth function)

you can choose RGB color, also can choose any kinds white color, such as warm white, natural white, pure white, 2700-6500k can be controlled.

It is very suitable for home smart lighting.

we can do rgb+cct adjustable led strip if you need, also control via bluetooth.

Smart LED light: http://www.newstarleds.com/products-192.html

LED Strip with Motion Sensor and Timer

I find that the measure of a good Instructable is the ideas that it inspires, which is why I enjoyed Instructable titled "Give Your Bed Under glow!" I never would have thought of adding an LED strip to the bottom of a bed otherwise, and I immediately wanted to do this for my kids.

I wanted to go a bit beyond what did and add the ability to have the lights turn on when needed and off again after a period of inactivity, so I decided to try my hand at hacking the LED strip to do just that. This instructable will show you how I went about hacking my LED strip to add a microcontroller and motion sensor. Hopefully the ideas you find here will serve as a launching point for your own ideas and improvements..

(This step is a discussion of my approach to hacking the LED strip, and may not necessarily be well described. If you just want to get on with the instructions already, feel free to skip to the next step.)

The LED strip I purchased (found here: http://www.newstarleds.com/products-177.html) came with an LED controller and remote control, which I think is quite common.

The idea is to be able to add a microcontroller that can control the power to the LED strip (turn it on and off as needed), without losing the ability to control the color and pattern with the remote control. There were two options, as I saw it:

Build an entirely new control circuit.

This would require integrating the remote control receiver into the new microcontroller, reverse engineering the remote protocol, adding MOSFETs to control power to each of the LED channels (and, probably, a MOSFET control chip), and programming the light values and patterns into the microcontroller.

However, that's quite a lot of work and a lot of additional electronic components. To be honest, and let's be clear about this, I'm far, far too lazy to do all that work, which leaves option number...
Wire the microcontroller into the existing circuitry.

This is the approach I took for this Instructable. and will be described below.
Somehow the circuit needs to be modified to allow the microcontroller to control the power supplied to the logic portion of the LED controller circuit board.

A quick look at the LED controller circuit board shows that there are two black ICs. The upper IC in the pictures is the brains of the controller. It changes the LED color, does pulse-width modulation (PWM), and controls the light patterns. I'm guessing that the lower IC is a MOSFET control chip, which turns power on and off to each of the LED power lines (I could be wrong about this, however). There's also a ground plane (highlighted red in the third picture), a +12 volt power rail, and a +4.7 volt power rail (highlighted in blue). There are several potential solder points (highlighted in yellow).

The LED controller accepts commands from the remote control, allowing the LED colors to be set and for different display patterns to be selected. The controller is able to remember the LED settings when power is removed and reapplied, which will be very helpful.

I measured the current being drawn by the two ICs at about 1 mA, which is well within the current sourcing abilities of most microcontrollers, so a transistor or MOSFET will not be needed and the ICs can be powered directly from the microprocessor. All that is required, then, is to disconnect the two ICs from the +4.7 volt power rail (by cutting the circuit board trace at the black line), tie the microcontroller to +4.7 volts and ground, and connect one of the microcontroller pins to the power pins of the two ICs on the LED controller circuit, so that the microcontroller can power the ICs at will.

A simple and cheap PIR motion sensor can be easily connected to the microcontroller to detect motion, and the microcontroller can easily be programmed to timeout after a specific period of time.

Seems simple enough!

Next: Do you want to know more details about the LED Strip light?

SK6812RGBW RGBW101IC led strip

RGBW101 SK6812RGBW led strip

1. Product Overview :

RGBW101 led strip is a new type of built-in ic RGBW 4in1 led strips,the ic is 4channel RGBW101 ic,the led is R,G,B,W four color chips packaged with RGBW101 ic inside 5050 smd led.It is addressable rgbw strips with digital ic control,can be programmable controlled ,so it is digital rgbw ,which not only have the digital rgb led strip`s function,but also you can achieve the digital pure white color water running effect,breathing,dimming,color chasing and so on.

2. Picture of RGBW101 led strip :

1. SK6812RGBW RGBW101IC led strip Product Overview :

SK6812RGBW with RGBW101IC is a smart LED control circuit and light emitting circuit in one controlled LED source, which has the shape of a 5050 LED chip. Each lighting element is a pixel, and the intensities of the pixels are contained within the intelligent digital interface input. The output is driven by patented PWM technology, which effectively guarantees high consistency of the color of the pixels. The control circuit consists of a signal shaping amplification circuit, a built-in constant current circuit, and a high precision RC oscillator.

The data protocol being used is unipolar NRZ communication mode. The 32-bit data is transmitted from the controller to DIN of the first element, and if it is accepted it is extracted pixel to pixel. After an internal data latch, the remaining data is passed through the internal amplification circuit and sent out on the DO port to the remaining pixels. The pixel is reset after the end of DIN. Using automatic shaping forwarding technology makes the number of cascaded pixels without signal transmission only limited by signal transmission speed.

The LED has a low driving voltage (which allows for environmental protection and energy saving), high brightness, scattering angle, good consistency, low power, and long life. The control circuit is integrated in the LED above.

2. Main Application Field:

● Full color LED string light, LED full color module, LED super hard and soft lights, LED guardrail tube, LED appearance / scene lighting

● LED point light, LED pixel screen, LED shaped screen, a variety of electronic products, electrical equipment etc..

3. Description:

● Top SMD internal integrated high quality external control line serial cascade constant current IC;

● control circuit and the chip in SMD 5050 components, to form a complete control of pixel, color

mixing uniformity and consistency;

●built-in data shaping circuit, a pixel signal is received after wave shaping and output waveform distortion will not guarantee a line;

●The built-in power on reset and reset circuit, the power does not work;

●gray level adjusting circuit (256 level gray scale adjustable);

● red drive special treatment, color balance;

● line data transmission;

● plastic forward strengthening technology, the transmission distance between two points over 10M;

●Using a typical data transmission frequency of 800 Kbps, when the refresh rate of 30 frames per sec

4. Mechanical Dimensions:

ws2811 digital led strip video     APA102 Compare WS2812B

Posted by NEWSTAR LED CO., LIMITED

www.newstar-ledstrip.com / info@newstarleds.com

ws2811 led strip, addressable LED strip WS2811, digital ws2811 led pixel...

Newest design Philips chip LED track Light

Philips chip LED track Light

1, 30W 

2, Philips COB Chip

3, Input voltage: AC85-265V

4, CRI>80

5, PF>0.95

6, >90LM/W

7, Beam Angle: 15,24,40 degree

8, CE, RoHs

9, 3 years warranty

Features

uPlane engine like design in shape, fashionable and attractive.

uWide adjustable light direction, flexible for light distribution.

uDifferent angle polished reflectors for option,  high reflectivity, no glare.

uHigh brightness, high CRI Edison COB, up to 80,000hrs life span.

uHigh quality LED driver, surging resistant, high PF, up to 50,000hrs.

uInternal aluminum radiator fins, keep working temperature below 50D.

uFire retardant PC as housing material,  electrical and heat safe, reliable.

Next: High power 18W RGBW LED Track Light with RF remote

2.4G RGBW LED Flood Lights, 4 colors in one chip

RGBW LED Flood Lights, 4 colors in one chip

2.4G RGBW LED Flood Lights

2.4G RGBW LED Flood Light

FEATURES:
	2.4G RF RGBW LED Flood light with 4-zone remote control
1	Power: 30W RGB+10W warmwhite 2700K
2	Remote range: 30 meters
3	Input voltage: AC100-240V
4	material: Aluminum,toughened glass
5	LED color:RGBW
6	Working temp: -20~60 degrees
7	Life span: 50,000h
8	package:	24.8x19.4x6.8cm inner box 20pcs a carton
9	Net weight:1000g
10	Gross weight: 1060g
11	Compatible with wifi bridge

Application

2.4G RGBW LED Flood lights are widely used in garden,villa, factory, gymnasium, boat yard, billboards, buildings, lawns, landscaping, offices, the site of light project and decorative lighting projects etc.