NEWSTAR LED CO., LIMITED: Digital led strip

显示标签为“Digital led strip”的博文。显示所有博文

2015年2月6日星期五

Magic color led strip with Aluminum profile

2014年12月29日星期一

Built-in IC digital LED Strip

Recommended APA104 LED Strip

Newstar LED Co., Limited is a market-leading innovator and professional led manufacturers in the field of high power led that engaged in researching, developing, manufacturing and sales of led light, Newstar has a well-trained team including full experienced technicians and salesman, "product quality and service foremost" is our main goal.

1, APA104 LED CHIP

Features and Benefits
 Intelligent reverse connect protection, the power supply reverse connection does not damage the IC.
 The control circuit and the LED share the only power source.
 Control circuit and RGB chip are integrated in a package of 5050 components, form a complete
control of pixel point.
 Built-in signal reshaping circuit, after wave reshaping to the next driver, ensure wave-form distortion
not accumulate.
 Built-in electric reset circuit and power lost reset circuit.
 Each pixel of the three primary color can achieve 256 brightness display, completed 16777216 color

full color display, and scan frequency not less than 400Hz/s.
..............

General description
APA104 is a intelligent control LED light source that the control circuit and RGB chip are integrated in a package of 5050 components. It internal include intelligent digital port data latch a
nd signal reshaping amplification drive circuit. Also include a precision internal oscillator and a 12V voltage programmable constant current control part, effectively ensuring the pixel point light
color height consistent.
The data transfer protocol use single NZR communication mode. After the pixel power-on res
et, the DIN port receive data from controller, the first pixel collect initial 24bit data then sent t
o the internal data latch, the other data which reshaping by the internal signal reshaping amplification circuit sent to the next cascade pixel through the DO port. After transmission for each
pixel，the signal to reduce 24bit. pixel adopt auto resha-ping transmit technology, making the pixel cascade number is not limited the signal transmission, only depend on the speed of signal transmission.
LED with low driving voltage, environmental protection and energy saving, high brightness,
scattering angle is large, good consistency, low power, long life and other advantages. The control chip integrated in LED above becoming more simple circuit, small volume, convenient installation.
.........

Mechanical Dimensions

.........
(More details, you could view the APA104 LED Chip SPEC)

2, APA104 LED Strip

1), 30leds/m APA104 LED Strip

2), 60leds/m APA104 LED Strip

3), 144leds/m APA104 LED Strip

APA104 LED is Taiwan chip, as it is more stable and long lifespan, so more and more people like it to replace ws2812b/ws2811/ws2801/HL1606/LPD8806 LED, and NEWSTAR LED CO., LIMITED is a professional factory for all kinds of LED strip, all LED lighting products used Top quality materials, High level Chip, Long lifespan, perfect performance, so more and more people purchase LED lighting products from NEWSTAR LED Co., limited, this manufacturer is reliable partner, choose them is your best choice I think.

No matter what kinds of led light you need, welcome to contact with NEWSTAR LED co., limited.

NEWSTAR LED CO., LIMITED

http://www.newstarleds.com

2014年11月16日星期日

RGBW 60leds/m 5050 smd LED Strips

Nowadays, our company have design a new led chip , which have 4 chip inside 5050 smd , it is RGBW LED CHIP , there are Red, Blue ,Green , White/Warm White Chip inside , it is a new led chip , new technology , then the MIX color can be more different , the color can be more beautiful , by the way , we also have develop RGBW LED CHIP addressable led strip ,they are 60leds 20ics , they can be UCS9812, UCS2912 LPD1882 LPD6812 and so on .

about the parameter of those led chip ,you can visit this http://newstarleds.blogspot.com/2014/11/5050-smd-rgbw-led-chip-4-in-one.html

RGBW LED Streifen without IC

you could use Milight controller to control our RGBW LED Strip

RGBW LED Streifen.

Dream Color Pixel APA102 LED Strip: http://www.newstar-ledstrip.com/productshow587.html

Newstar led co., limited

www.newstar-ledstrip.com

5050 SMD RGBW LED CHIP 4 IN ONE LED Strip Lights

NEW LED: RGBW101IC SK6812RGBW LED Strip lights

(All in one RGBW with built IC)

Normal RGBW LED Strip

RGBW LED provides the leading Chip on Top SMD type of LED technology for high efficiency solid-state

lighting solutions. It offers excellent uniformity, flexibility and cost efficiency along with compact size and wide range

of color selections. All components are produced by packing high-performance RGBW LED chips and silicon resin with proprietary phosphors.

1. Features and Benefits

. Ideal for LED lighting application to avoid multi-shadows
. Higher heat conductivity for better thermal management
. Provide variable and innovative array LED layout designs and combinations
. Reduce the initial development cost and time
. High lumen-performance per dollar cost
. Lead free reflow solder compatible with RoHS compliant

2. Applications
. Solid State Lighting
. Indoor/Outdoor/Decoration
. Signal Light Engine
. Commercial Display
. Industrial Light Engine
3. Dimensions and Materials
. Dimensions: 5.5 mm x 5 mm x 1.6 mm
. Packages: Top SMD
. Capsulated Resin: Silicone Resin with Silicate Phosphor
. Electrodes: Ag Plating
. Chips: Total 4 chips packed in cavity

(RGBW LED Streifen:http://www.newstar-ledstrip.com/products-177.html

Mechanical Dimensions

Notes:

1. All dimensions are in millimeters.

2. Tolerance is ±0.2mm unless otherwise noted

4. Electrical/Optical Characteristics

*1: Rth test condition: Mounted on PC Board FR 4(pad size≥16mm2)

*2: Measurement tolerance of the luminous intensity: ±10%. This value for reference only.

*3: Measurement tolerance of the luminous intensity: ±10%.

5. Absolute Maximum Ratings

*1: Ifp conditions: 1/10 Duty Cycle & 0.1ms for pulse width.

*2: Reflow method: 1.6mm from body for 5 seconds not exceeding the recommended maximum temperature.

6. Luminous Flux Rank

LEDs are sorted to Luminous Flux –lm bins are shown. Orders for The LED may be filled with any or all bins contained below. All Luminous Flux-lm values shown and specified are at IF =4x20mA.

7. Forward Voltage Rank
LEDs are sorted to VF bins shown. Orders for The LED may be filled with any or all bins contained below. All VF values shown and specified are at IF =4x20mA.

8. Dominant Wavelength Rank

9. Optical-Electrical Characteristic Graphs

10. Packaging Standard:

NS-S5050-04004-RGBW-BW/WT-000

4 in one RGBW LED Strip lights

http://www.newstar-ledstrip.com/productshow758.html

5 in one RGBCCT LED Strip lights

http://www.newstar-ledstrip.com/productshow759.html
More: http://newstarleds.blogspot.com/2014/10/rgbw-led-strip-light-4-colors-in-1-led.html

2014年10月16日星期四

Digital RGB decorative led strip lights

RGBW101 sk6812RGBW LED Strip

Digital RGB decorative led strip lights
NEWSTAR LED CO., LIMITED
1. This LED strip is easy to install,with long lasting brightness and low voltage
2. This LED strip is completely flexible, you can twist it into any shape.
3. This LED strip light is the coolest way to decorate any vehicles. It's safe for indoor and outdoor decoration.
4. Manykinds of color modes for choice.
5.Many flash types.
6.Can keep any one color.
Digital Pixel APA102 LED chip diodes:http://www.newstar-ledstrip.com/products-195.html

A data cable, two power lines, 12MM wide swatches, built-in IC, 256 gray levels can be achieved by the controller any effect can also be achieved, text, numbers, English, pictures, animations, and so on. (Controller:NS-T1000S )

NEWSTAR LED CO., LIMITED

NS-T1000S System features

1、32—256 Gray level，Support software Gamma correction。

2、Support the rules and special-shaped handle.

3、Single-port output，can support 2048 pixels。

4、Off-line(SD Card) control, play back content stored on the SD card.

5、T-1000S store a maximum of 16 programs，copy multiple files to the SD card in order,

after formatting the SD card as “FAT” format.

6、The program must be named in orders . just as ：00_1.led, 01_1.led, 02_1.led.

7、Compatible with single line or double line chips.

NOTE：1. When T-1000S controller control less than 512 lamps the frame rate can reach 30fps. When T-1000S control more than 512 lamps and less than 2048 lamps the frame rate will slow down automatically.

2. T-1000S must use the new software LedEdit 2013.

WSTAR LED CO., LIMITED

1. Multiple T-1000S controllers can be cascaded together and work synchronously.

2. T-1000S one TTL(SPI) signal and one RS485 signal port output，can control 2048 pixels/lamps；

3. When the chip for LED is single line chip just with data, then just need to be connected with DAT and GND of the controller. If the chip for LED is double line chip with DAT and CLK, then need to be connected with DAT, CLK, and GND of the controller.

4. If you need to use RS485 signal you need to connect controller A interface with LED lamps A (DMX+), controller B interface with LED lamps B(DMX-),

5. If you need to control a new IC type by the controller， software code mode is：T-1000-IC model.

Application:

1.Christmas/ Halloween show lighting;
2.For boat/barge decorations lighting;
3.Widely applicable as back lighting, cove lighting, decoration lighting, for home furniture, club, bar, hotel, commercial center;
4.Channel letter lighting using for stores, restaurants, bars;
5.Car interior and exterior lights;
6.Illumination lighting using walkway, canopy, stairway accent lighting, the amusement park;
7.Outdoor illuminated signs and advertisements.