NS107S, the upgrade of APA107 LED, much better than Taiwan APA102

NS107S is the upgrade type of APA107 LED

PWM refresh rate >26kHz, Oscillator Frequency is 30MHz

NS107S LED Product Overview
NS107S RGB LED Chip is a type ic for the three-color RGB Diming control strip and string ,This ic using the CMOS process to provide three-color RGB LED output driver to adjust the output with 256 gray scale and 32 brightness adjustment, NS107S Pixel diodes with 2 signal output way , one is clock ,another is data, the clock and data is synchronizated, so that the crystal cascade piece of output movement is sychronizated.

RGB NS107S LED Strip

White NS107S LED Strip

NS107S LED Feature
CMOS process,low voltage ,low consumption
Synchronization of two-lane
Choose positive output or negative RGB three-color LED output
8 bit(256 level) color set ,5bit(32 level) brightness adjustment
Build-20ma constant current output
With self-detection signal build in support for continuous oscillation PWM
output ,can be maintained static screen

NS107S LED Main Application Field:
● Full color LED string light, LED full color module, LED super hard and soft lights, LED guardrail tube, LED appearance/scene lighting
● LED point light, LED pixel screen, LED shaped screen, a variety of electronic products, electrical equipment etc..

NS107S LED Mechanical Product Size (unit mm):

NS107S LED Application Circuit:

More details, pls contact us.

NEWSTAR LED

info@newstarleds.com

www.newstar-ledstrip.com

APA107 Digital pixel led strip lights - More details

APA107 RGB LED SMD

APA107 RGB Digital pixel led strip lights details

Black PCB APA102 Upgrade type APA107 LED Strip lights

APA107 White LED strip is also available, can replace APA102 White LED


APA107 LED is our own technology, higher PMW, better price.

In a fair competition market, we have our own technology to reduce to cost, to break the monopoly. I think this is very good for economies, and the beneficiary is the consumer, so this is a very healthy development direction

We NEWSTAR also provide APA102 APA102C APA104 APA105 SK6812 SK6822 SK9822 WS2812 WS2813 with built in IC DC5V LED

And we can suggest the best solutions for our customer's pixel LED project

APA107 RGB LED SMD
http://newstar-ledstrip.com/productshow816.html

You can know the datasheet from this link
http://newstar-ledstrip.com/product/20180820112602493.pdf

Any problems, please contact us.
Newstar LED
www.newstar-ledstrip.com

5 in one RGBCCT LED tape and 5 in 1 all color with dual white DC12V DC24V RGBCCT LED Strip Light

Do you know RGBW LED Strip? let us introduce it:

  Below is normal RGB+W LED strip, you can see the RGB and White color chip is different LED, the brightness is lower than RGB LED strip or single white color LED strip, I means same LEDs quantity.
For example, 60leds RGB led strip or 60leds White led strip, it is more brightness than this kind 60leds RGBW led strip, so it only has 30leds RGB and 30leds White LED SMD, and we can only get RGB+3000K warm white, RGB+4000K natural white or RGB+6000K pure white. but it is the cheapest RGBW led strip option.

  With technology developing, the chip manufacturer can add white to RGB LED SMD, so we get four in one RGBW LED strip, as below:
  It is four in one LED RGBW led strip, RGB and white color in one LED, but it is same with above kind that we can only get RGB+3000K warm white, RGB+4000K natural white or RGB+6000K pure white. However it is better than normal RGB+W led strip, higher watt, more brightness, with more uniform lighting. I think everyone like one type led strip light can have RGB color, also can change the color temperature from 3000K to 6000K.


  
Nowdays, Newstar LED company has came out one newest led strip light-five color in one 5 in 1 LED RGBCCT led strip light, it means that we can get all color from this strip light, such as R/G/B RGB and 3000k to 6000k all white color, and the 5 in 1 RGBCCT LED Strip Light as below:

Actually in our market also have the following model RGB+CCT led strip light, RGB and White LED SMD is not same, as below:

Let us know how to play this kind 5 in 1 RGBCCT LED Strip, 

Firstly we need the below type controller with 6 channels,

Product Parameters

 |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Product Name: 2.4GHz 5 in 1 RGBCCT Strip Controller
Voltage: DC12V-24V
Output: Max. 6A/Channel, Total output Max.10A
Control Distance: 30m
Size: 85*45*22.5mm

Connection,

If you want to know more details about our 5 in 1 RGBCCT led strip light, we think you can buy one roll sample to test, so that you can know it clearly.

welcome to contact us, email info@newstarleds.com.

NEWSTAR LED CO., LIMITED.
www.newstar-ledstrip.com

The difference with APA102 and APA102c

There are two versions of the market, the APA102 and the APA102C, as shown below.

The APA102C comes in a package very similar to the WS2812, while the APA102 comes in a package with an increased metallization area to improve heat conduction. The APA102 is more expensive, possibly owed to the more complicated package. So far, I was only able to investigate the low-cost version, the APA102C.

The controller IC was designed by a Taiwanese company, Newstar LED. Unfortunately, they do not have a lot of detailed information on their website. But they were nice enough to send me the original data sheet upon request. I mirrored the datasheets here: APA102 and APA102C

I contrast to the very timing-sensitive one-wire protocol of the WS2812, the APA102 uses a standard two-wire SPI protocol – one clock line and one data line. Each LED has two inputs and two outputs which can be daisy chained. At the first sight, this may seem wasteful, but it has the advantage of being supported by standard microcontroller periphery and it is insensitive to timing variations. Due to the critical timing requirement, it is not possible to control the WS2812 from SOCs with multitasking operating systems, such as the Raspberry Pi. This should not be an issue with the APA102. Furthermore, the data can be transferred at an almost arbitrary clock rate. I was able to control the LEDs with 4 MHz SPI clock without any hitch. It appears that the maximum speed is mainly limited by the parasitics of the wiring. The data format is shown below.

Each update consists of a start frame of 32 zeroes, 32 bits for every LED and an end frame of 32 ones.  I am not sure what the “End Frame” is good for since its encoding is indistinguishable from a LED set to maximum brightness and will simply be forwarded to the next LED. In my experiments, omitting the end frame did not have any impact.

One interesting addition is the “global” field for each LED, which allows controlling the brightness of the LED in 32 steps from 0 to 31. When trying different parameters, I was quite surprised to observe that the LEDs did not show any visible pulse-width-modulation (PWM) flicker at all when the global brightness was set to 31. This is quite different from the WS2812, which shows visible PWM flicker when moving the LEDs.

Interestingly, the APA102 started to flicker once I set the global brightness to 30 or below. To understand what was going on, I hooked up my scope to the power rails. When the LEDs are turning on, they draw significantly higher current which leads to a drop in voltage across the power rails. I previously used a similar method to investigate the inner workings of candle flicker LEDs.

The picture above shows the current modulation for RGB=255,255,255 and the global brightness set to 16 (50%). The pulse width modulation is clearly visible in the voltage signal at a frequency of 580 Hz, very similar to the 430 Hz of the WS2812.

Next, I set the RGB value to 128,128,128 and kept the global brightness at 50%. The result is shown above. Two PWM modulation schemes are superimposed in this configuration. The global brightness is still modulated at ~582 Hz, while the RGB value is modulated at an approximately 32 times higher frequency, 19.2 kHz. This frequency is significantly above the flicker fusion threshold, even when moving the LED around, leading to an apparent constant brightness.

The very high PWM frequency is a pretty nice feature of these LEDs. In combination with the higher update speed due to the SPI interface, they should be much better suited for persistence-of-vision applications than the WS2812.

In summary, the APA102 show significant promise compared to the de-facto standard WS2812:

• They can be controlled with a standard SPI interface. No critical timing required and much faster than the one wire protocol.
• They have an extremely high PWM frequency, allowing flicker-free POV applications.
• They are available in a special package with better heat sinking.

NEWSTAR LED CO., LIMITED 
www.newstar-ledstrip.com

020 side view DC12V 60leds ws2811 020 rgb digital led strip

DC12V ws2811 020 rgb digital led strip pictures

DC12V ws2811 020 rgb digital led strip Features:
1, 020 rgb chip
2, side view strip

3, ws2811 IC

Detailed Product Description

1, Light Source: 5050 SMD LED

2, CRI:80

3, Color Temperature(CCT): RGB

4, Working Temperature(℃): -20 - 60

5, IC Type: WS2811  (UCS1903, LPD6803, WS2801)

6, Led Chip: Epistar

7, IC Qty: 20

8, LED Qty: 60leds

9, Pixel: 20

10, Size: 5000*10*2.5 Mm

11, Working Voltage: DC12V

12, Waterproof: IP20/IP65/IP67/IP68

DC12V ws2811 020 rgb digital led strip Video:

Link: APA102 Compare WS2812B APA102C compare with SK6812

NEWSTAR LED CO., LIMTIED is professional for all kinds of LED strip, and we can make special strip according to customer's request, any needs pls contact with us "info@newstarleds.com"

Posted by NEWSTAR LED CO., LIMITED

www.newstarleds.com / info@newstarleds.com

10W-100W solar energy LED street light sun power integrated public lighting

 Firstly, introduce our newest solar led flood lights, support 1pcs solar panel connect with 2pcs solar flood lights 

Newstar LED Co., Limited Established in 2009, covering an area of 2100 square meters, we now have over 50 employees, we are a professional manufacturer and exporter that is concerned with the design, development and production of LED lighting products. We are located in Shenzhen city, with convenient transportation access. All of our products comply with  international quality standards and are greatly appreciated in a variety of different markets throughout the world.

Newstar has a well-trained team including full experienced technicians and salesman, "product quality and service foremost" is our main goal. An annual sales figure that exceeds USD15,000,000 and 80% of our products exported to more than 100 countries. More and more customers are continually choosing Newstar for our excellent quality and service, your OEM or ODM are welcomed

The main products of our company: led flood light, led high bay light, led panel, led strip, led downlight, led tube, and so on, all of which are widely used in commercial lighting decoration, indoor and outdoor using, home and decoration, bus and train station using, advertising and cabinet Lighting.

Quality Control: Newstar’s operation strictly follows the ISO9001 standard. All of our products have CE, ROHS certificates. The key material we source from Samsung, Cree, Bridgelux, Epistar, MeanWell to assure a steady and top-grade quality.

As a globally operating manufacturers, we also strongly encourage socially and environmentally authoritative energy-saving policies around the world - as well as sponsoring art and beauty at home and world! Join us to achieve the mutual benefit, and let's make people's life brighter and more colorful!

Solar Photovoltaic 30W Integrated LED Street lights

NEWSTAR LED's Solar Integrated LED Street lights work by capturing energy from the sun on an integral or wire connected solar panel. The captured energy is then converted into electricity and stored in batteries. This stored electricity is used to power the solar LED Street lights at night.
Solar panel collects energy during the day and Automatically illuminates when the sun goes down provides at least 8 hours of light each night.
And NEWSTAR LED's solar LED street light support RF remote function if you need.

Product Name: Solar Photovoltaic 30W Integrated LED Street lights

Product Code: NSS-SL30W
Product Type: Solar LED Street lights
LED Type: Epistar 35Mil LED
LED Qty: 30pcs
Brightness: 2700/1350 lumens (full/half power)
Battery: Li-Ion 21000mah 7.4V battery (inside of the lamp)
Solar panel type: 50W Polycrystalline Solar Panel
Discharge time: 8 hours under full power work
Charge and discharge times >1000times

Remote function is available, 
The RF Remote Control Operation: ON/OFF
Have manual mode and automatic mode
Dimming (10% to 100% is adjustable)
Smart timing (1 hr, 2 hrs, 3 hrs, 4 hrs, 5 hrs, 6 hrs)

Warranty: LED Street lights = 2 years
              Solar Panel = 3 Years
              Battery =1 year
Perfect product for home lighting and commercial lighting use.

Solar energy LED street light Application:

1. Street

2. Campuses

3. Parking lots

4. Bridge

5. Sports ground

6. Garden

7. Highway

8. Gas station

9. Some other outdoor places where need Street lighting decoration

NEWSTAR LED solar led street light have remote function, include a RF controller, so it is more easy to control the lamp.

The users can change the brightness. This will depend on one’s preference. However, when the light is used specifically for lighting purposes at night, it is smart than other normal solar led flood light, as you can control it via RF remote.

If you wan to know more details about our RF Solar led street light, please contact with us at once, info@newstarleds.com, this is a good chance to expand your business in the solar lighting area, we are looking forward to get your inquiry.

Remark

1,  Default length cable wire, LED street light with 1M DC Male, Solar Panel with 1M DC Female

2, If you need longer cable wire on the LED flood light, add $0.5 cost per meter, the Max length suggest 10M.

3, Support One solar panel connect with Two LED street light, the one-in&two-out connecter is available.

Posted by NEWSTAR LED

www.newstarleds.com

info@newstarleds.com

0086-0755-29405686

The benefits of solar LED Flood lights

As you know NEWSTAR LED is promoting their newest design-solar LED flood lights with RF remote, this is design make solar led flood light more smart, you can adjust the brightness if you don't high lumen, so can save more power to light up for a whole night.
And it is better for big outdoor billboard, as you can control many of our solar led flood light via one RF remote, like below picture:

And our RF remote have two mode, one is Manual mode, another one is Automatic mode, different function with different mode, and very easy to use.

Now let us know more benefits about the solar LED Flood lights
There benefits of solar LED Flood lights are numerous. Here are some examples:

•Low energy costs. The sun is well-known for providing solar radiation without charge.

•Little maintenance. Solar power products have few moveable parts which means that fewer parts exist to break. They last for a long time and require little attention once installed.

•No emissions. Perhaps the greatest benefits of solar lighting are the environmental benefits. Solar lighting does not contribute to global warming in any way.

•Renewable resource. Solar power is a renewable resource. Other energy resources, such as coal and oil, have finite supplies. The power of the sun, on the other hand, will keep on shining, potentially beyond human existence.

•With solar lighting there is no risk of electrocution and the lights are cool to the touch, making them safe for children and pets.

•solar LED Flood lights continue working even if there has been a power outage. Because the energy isn’t coming off of an electrical grid, power outages make no difference.

•You can use solar lighting to light homes, cabins, or RVs in remote locations. It can be very expensive to run power lines out to a cabin in the woods. Setting up solar power may be a cheaper, more practical alternative.

•Versatility. Solar energy can power many different lighting needs, including walkway lights, indoor lights, security lights, portable spotlight stands, and handheld lanterns and flashlights.

•Another of the many benefits of solar lighting is that most outdoor solar lights have automatic light sensors. There is no need to stress about turning them on or off; it is handled automatically.

•Easy installation. The majority of outdoor solar LED Flood lights has no confusing wires that must be connected to your main electrical system. Setting up your lights can be as simple as hanging them on a tree or staking them into the ground.

These advantages extend to both the wallet and the environment. In addition to all of this, the benefits of solar LED Flood lights are only destined to increase as solar technology advances.

Posted by NEWSTAR LED

www.newstarleds.com

info@newstarleds.com

0086-0755-29405686

Do you know how did the commercial solar LED flood lights work?

Solar LED flood lights work by capturing energy from the sun on an integral or wire connected solar panel. The captured energy is then converted into electricity and stored in batteries.  This stored electricity is used to power the solar LED flood lights at night.

(RF solar LED Flood light)

By having and using this lighting feature, business owners can have lower electricity bills and you can still have well-lighted outdoor premises even when there’s a power failure. Commercial solar flood lights can also boost the level of security in various types of business establishments. Below are the ways commercial solar LED flood lights can increase security in your business premises:

They can help boost nighttime pedestrian traffic and sense of security. Installing reliable outdoor lighting features can increase pedestrian traffic and help people in the area have a stronger sense of safety and security. This leads to an increase in customer traffic. If customers feel that your establishment has sufficient lighting, they will see this as a safe place to visit and they will be more apt to return.

In addition, this can also help boost the morale of your employees since having the right exterior lighting fixtures can provide them a sense of well-being that you provided the necessary lighting to ensure their safety. You also let your employees know that their security is top priority.

(RF solar LED Flood light package)

It can prevent crime against your property and people. Deterring crime is the main role that a solar LED flood light offers. Solar energy permits the LED flood lights to operate even when the power is out. Criminals are not known for operating in areas where they can easily be caught, such as places that have sufficient lighting. Lighting the exteriors of your business premises with good solar powered lighting fixtures that operate no matter what will help deter crime and also provide easy recognition if something still happens.

It will assist the use of other devices such as CCTV cameras installed on your outdoor premises. Solar flood lights provide better lighting for CCTV cameras to visually see what is in the area at a given time. There are certain types and brands of solar LED flood lights that can operate at a lower light level for camera use, and then switch to a high powered light when motion activated to increase visibility and distance of the camera’s sight. This ensures that security personnel outside your business premises enjoy full visibility of what is going on at a particular area at a specific time. Check our selection

Business owners have the big responsibility of providing additional safety and security at night for their employees, customers and their property. By investing in a reliable and low-cost lighting system, you can easily achieve this important goal.

Highly recommended NEWSTAR LED's RF solar LED Flood light. you can adjust the brightness.

Solar system RF solar led flood light, 3w/6w/10w/20w/30w solar led flood light

Solar system RF outdoor 10w led floodlight, RF solar led flood light

Support one 1pcs solar panel to connect with two 2pcs solar led flood lights with RF remote dimmable function. (only we can do it)

NEWSTAR LED co., limited is a professional LED lighting products manufacturer, now they came out a newest design “RF solar led flood light”. Normal solar led flood light just include solar panel, battery, led flood light, solar panel collects energy during the day and Automatically illuminates when the sun goes down provides some hours of light each night.

Now NEWSTAR LED manufacturer provide a smart solar led flood light, also include solar panel, battery, led flood light, AND RF remote, what is RF control? you should know it if you have RF rgb led flood light before, NEWSTAR LED's RF remote for the solar led flood light as below:

Let's see what’s special for RF Remote controller

1. One remote can control several lights.

2. After set code, the light will turn off during daytime, and it will turn on automatically after sunset, and lights will turn to be half power mode after few hours (you can set the time)

3. 100-150m control distance, brightness adjustable, all under control even you sit at balcony.

Want to know more details, please contact with us: info@newstarleds.com.

Adjust the brightness

Now let's see some pictures for NEWSTAR LED's  RF solar led flood light

(10W RF solar led flood light)

(This is still 10W RF solar led flood light, however it is used 30W led flood light housing, and more popular)

(safe package for RF solar led flood light)

Specification for 10W RF Solar led flood light

With 18pcs Epistar 5730SMD LEDs.

Light output is 700/350 lumens (full/half power).

Comparable to a 130 watt incandescent bulb (at full power).

International Standard materials..

2800-6500K color temperature is available (if you need RGB color, please contact us info@newstarleds.com)

Includes Ni-MH 7800mah 7.4Vt battery.

NEWSTAR LED also provide polycrystalline solar panel for you, or you can buy polycrystalline solar panel from other professional factory, and just buy RF solar led flood light from NEWSTAR LED.

Besides 10W RF solar led flood light, NEWSTAR LED also could provide 3W/6W/20W/30 RF solar led flood light for your choose, and provide OEM service, we can print your logo or other information on the Lamp or Box, if you have any other request, please also tell us info@newstarleds.com

(20W RF Solar led flood light)

(30W RF Solar led flood light)

This incredibly bright LED solar flood light is powered by the sun and uses a fraction of the electricity of a normal light. Light up flags, signs, house numbers, driveways, porches, statuary, or any large outdoor feature. It lasts virtually forever with no utility charges, ever. Light stays bright for up to 7 hours at full-power when fully charged, but you can use RF remote to adjust the brightness, or let it turn to work in half power after few hours later(you can set this).

NEWSTAR LED solar led flood light system, include a RF controller, so it is more easy to control the lamp.

The users can change the brightness. This will depend on one’s preference. However, when the light is used specifically for lighting purposes at night, it is smart than other normal solar led flood light, as you can control it via RF remote.

If you wan to know more details about our RF Solar led flood light, please contact with us at once, info@newstarleds.com, this is a good chance to expand your business in the solar lighting area, we are looking forward to get your inquiry.

Remark

1,  Default length cable wire, LED flood light with 1M DC Male, Solar Panel with 1M DC Female

2, If you need longer cable wire on the LED flood light, add $0.5 cost per meter, the Max length only 5M.

3, Support One solar panel connect with Two LED flood light, the one-in&two-out connecter is available.

Posted by NEWSTAR LED

Date: 11/7/2015

www.newstarleds.com

info@newstarleds.com

0086-0755-29405686

NEXT: CCT adjustable LED Lights can protect our health!